The GF series feeder is a rod vibrating feeder suitable for light working conditions using a vibrating motor as an excitation source. It is designed for mobile stations, semi-fixed stations and small stock yards (generally less than 250TPH, silo) Designed for effective volume less than 30m3), it is suitable for feeding to jaw crushers, first-stage counter crushers and hammer crushers, as well as for conveying. The vibration intensity can reach 4.0G, which is more than 20% higher than that of the traditional feeder, and the load of the initial crusher can be reduced by more than 15%.
The GF series feeder uses a vibrating motor as the excitation source to drive the equipment to vibrate, forcing the material to slowly push from the feed end to the discharge end. At the same time, the material is sieved to make it more uniform in particle size. Typically, a discharge grid is provided at the discharge end of the feeder, through which material having a particle size smaller than the spacing of the bars is separated and the larger particle size is conveyed to the crusher. The feed capacity of the feeder can be adjusted by changing the exciting force of the vibration motor, and the material can be further sieved by using a sieve layer installed at the lower portion of the feeder.
